Corel KPT(R) Collection ReadMe
*********************************************************
Code :TF70CRD-0018269-JVR


Contents:
1. Introduction
2. Mac(R) OS X Notes
3. Registration
4. System Requirements
5. Installation Instructions
6. Known Issues
7. Other
8. Contact and Support Information
9. Copyright and Trademark Information



1.  Introduction
Welcome to Corel KPT(R) Collection.  This document contains 
important information about installing and using this 
collection of filters.  Please review the system requirements 
and installation instructions.



2. Mac OS X Notes
We have provided Mac users with both a non-Carbonized 
and a Carbonized collection of filters.  During the installation, 
you will be prompted to choose which collection you would like 
to install, based on the host application you'll be using.

The Carbonized and packaged collection (Mac OS X compatible) will work with 
hosts that have been Carbonized and can run natively 
on Mac OS X.  Examples of these hosts are 
Corel(R) PHOTO-PAINT(R) 10, Bryce(R) 5, and 
Painter 7(TM).   

In OS X, The packaged collection (Mac OS X compatible) will work with 
hosts that are packaged.  Examples of these hosts are 
Corel(R) PHOTO-PAINT(R) 11 and Adobe(R) Photoshop(R) 7.0. 

The non-Carbonized collection (Mac OS 8.6 - 9.x compatible) 
will work with hosts that have not been Carbonized and 
that would run in Classic mode on OS X.  Examples of these 
hosts are Adobe(R) Photoshop(R) 7.0, Corel PHOTO-PAINT 8, 
Bryce(R) 4, and Corel Painter 6.1.

The Carbonized collection will not run in a non-carbonized host
application.

If you want to use Corel KPT(R) Collection in both a Carbonized and a 
non-Carbonized host, you will have to perform separate 
installations.

Corel KPT(R) Collection will not function installed on a UNIX partition 
under Mac OS X.



3.  Registration
Microsoft(R) Internet Explorer 4 (or higher) or Netscape(R) 
Navigator 4 (or higher) are required to successfully register
KPT(R) Collection.



4.  System Requirements

For Macintosh(R):
Mac OS 8.6 or higher or Mac OS X
Power Macintosh (180MHz or higher)
Adobe Photoshop 5 or higher
32 MB RAM or greater allocated to host (64 MB recommended)
128MB RAM for MAC OS X
25MB or greater available hard disk space
24-bit (800x600) color display (1024x768 for Mac OS X) 
CD-ROM Drive
Mouse or tablet


For Windows(R):
Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows NT 4.0 (with service pack 6), Microsoft Windows ME, or Microsoft Windows XP
Pentium processor, 200MHz or higher
Adobe Photoshop 5 or higher
32 MB RAM or greater allocated to host (64 MB recommended)
128MB for Windows XP
25MB or greater available hard disk space 
24-bit (800x600) color display (1024x768 for Mac OS X) 
CD ROM Drive
Mouse or Tablet



5. Installation Instructions

Mac Installation Information:

Power Macintosh
1. Insert the Corel KPT(R) Collection CD-ROM into your CD-ROM drive.
2. If a window displaying the contents of the CD-ROM does not open
   automatically, locate and double-click the Corel KPT(R) Collection CD-ROM 
   icon to view its contents.
3. Locate the Corel KPT(R) Collection folder on the Corel KPT(R) Collection CD-ROM, and 
   double-click the Corel KPT(R) Collection installer icon to begin installation.
4. The installer prompts you to locate your Plug-ins folder. This 
   folder is likely within the Photoshop application folder, or 
   within the folder of a compatible host such as PHOTO-PAINT, 
   Bryce, or Painter.
5. Click Continue in the main install window.
6. You will be prompted to choose the type of installation, based on 
   the host application that will be running Corel KPT(R) Collection. It will 
   default to the OS 8.6 - 9.x compatible host option.  
7. Click Install to complete the installation.

After completing installation, simply run your host application, such 
as Photoshop, Bryce, or Painter, and choose a Corel KPT(R) Collection plug-in from 
within the Filter or Effects menu.

MACINTOSH INSTALLATION TIPS
Ensure that your Mac OS is 8.6 or later, and your display is set to a 
minimum of 24-bit (millions of colors). Also ensure that you have no 
open applications, and that there are no applications running in the 
background (this includes anti-virus software, crash monitoring 
software, and system diagnostic software).

RECOMMENDED RAM ALLOCATION
The minimum RAM requirement for Corel KPT(R) Collection to run within the host 
application is 32 MB. For normal usage, it is best to allocate 
as much RAM as is available to your host. Some host applications 
exhibit anomalous behaviors in low memory environments. Performance 
can be enhanced by allocating more RAM to the host.

PC Installation Information:

1. Insert the Corel KPT(R) Collection CD-ROM into your CD-ROM drive.
2. If a window displaying the contents of the CD-ROM does not open
   automatically, locate and double-click the Corel KPT Collection CD-ROM icon
   to view its contents.
3. In the Corel KPT(R) Collection's installer, click  the "Install" option.
   The Corel KPT Collection's End User License Agreement appears.
4. Read the entire agreement. THe accept button will not appear until you scroll
   through the entire license.
5. FOllow the on-screen instructions and click "Next".
6. Click the "Browse" option to locate your host application's 
   plug-ins folder.
7. When you have a complete path statement ending with your 
   plug-ins folder, click "OK".

After completing installation, simply run your host application, 
such as Adobe Photoshop, Corel PHOTO-PAINT, Bryce, or Painter, 
and choose a Corel KPT Collection plug-in from within the Filter or 
Effects menus.

WINDOWS INSTALLATION TIPS
Ensure that your operating system is supported. 
(Corel KPT(R) Collection does not run on Win 3.x or NT 3.x.x and Windows 95 is
not a supported operating system), and that your display is set to 
a minimum of 24-bit color (true color).

Also ensure that:

* you have no open applications, and that there are no applications 
  running in the background (this includes anti-virus software, crash 
  monitoring software, and system diagnostic software).



6.  Known Issues

Applying filters to selections:  Host applications based on the Adobe(R)
Photoshop(R) 3 plug-in specification, such as Corel Painter, can't apply 
a filter outside of a selection.  If you try to do so within 
Corel Painter, or other such hosts, you will notice that 
the preview is incorrect, and that artifacts might appear on the final
image. Photoshop 4 or later (or compatible hosts) do not yield these 
results.

All filters

The default panel layout and recall mem-dots ( center dots ) in some cases do not coincide with the initial layout and control settings you will find when first launching the the individual filters.   You may define your own default values for the layout and recall panels center mem-dots.   To re-define default mem-dot values hold SHIFT + ALT while clicking on the center mem-dots.  This will assign the current panel layout, or controls settings, to the center default mem-dots respectively.    Note: Equalizer, Lensflare,  and Gel center default mem-dots will not retain values.

Preview Options:  If your source image has no alpha channel, you may
not be able to see the different previewing options (black, white,
checkerboard, dark checkerboard, etc.).

When your taskbar is at the top of the screen, and you reduce and 
then expand your workspace to full screen, the presets, cancel, and 
accept buttons are partially cut off at the bottom of the screen.

The help files may not launch in Mac OS 9.2 with Adobe Acrobat 
Reader 4.0 installed.  You will have to locate them in the
...\KPT Collection\metaos\User Guide folder.

Presets are meant to be used as a starting point.  When you choose
a preset, it will overwrite any existing work you've created in 
your session.

KPT FraxFlame II(TM)
If the flame fractal in the parent window of the Mutation panel is
not the same as the fractal in the Preview window and you can't get
it to update, set the Genetic Mutation slider (on the Mutation 
panel)to 0, so that all of the smaller surrounding fractals take on 
the shape of the parent fractal.  Click one of the surrounding
fractals to update (regenerate) the parent, and the Preview
window will refresh.

KPT Gradient Lab(TM)
Gradient blending:  When applying the Hue map blend mode to a 
JPEG source image, you may not get a good result due to the quality
of the JPEG format.

Presets in the Gradients folder (Category 1, Category 2, Category 3, 
Category 4) are color blend presets and can be imported through the 
Gradient panel (arrow in top right corner).  Presets in the Gradient 
Lab folder store the layer and slider information all of the panels 
within the filter.

KPT Lightning
There may be slight differences between the thumbnail in the 
Preset Manager and what gets displayed in the Preview window.

KPT Scatter(TM)
Particle panel:  Alt + click to remove particles.

If you get an error message when trying to import a particle from
the ..\Samples\Particles folder on the CD, go up one folder 
level and then back down to the Particles folder.

The best particle results are achieved from files with a transparent 
background and a modest file size.



7.  Other

Adobe Acrobat Reader 5.0 and Apple Quick Time 5.0 are included on 
the CD for your convenience.  They are located in a folder called 
"Utilities", off the root of the CD.  You will need an internet 
connection to install Acrobat Reader 5.0.


8.  Contact and Support Information

If you need further assistance, you may contact Corel Technical 
Support in any of the following ways:

Web Support:
Many of the answers to your questions are available 24 hours a 
day on our Website: 

http://www.corel.com/support

To answer your technical support question most effectively and 
quickly, please use the email form provided to you on our Website.

Phone Support:
Phone support hours are Monday through Friday, 8:30 AM to 7:30 PM 
Eastern Standard Time, excluding holidays. Call (613) 274-0500. 
When calling, please have your serial number handy and be at the 
computer for which you need assistance.

Corel Customer Service (North America Only) 
Call us at 1-800-772-6735; our hours of operation are:
9:00 a.m. - 9:00 p.m. Eastern Standard Time (EST), Monday - Friday, 
and from 10:00 a.m. - 7:00 p.m. EST on Saturday. 

Fax: 1-613-761-9176 

E-mail: custserv@corel.ca 

International Technical Support: 
If you live outside the United States or Canada, please contact 
the international support office nearest you.  To find your 
nearest support partner: 

Go to our Web site at: 

http://www.corel.com/support

to find a complete list. 



9.  Copyright Information

Copyright (c) 2003 Corel Corporation.  All rights reserved.

Corel KPT(R) Collection

This software is the property of Corel Corporation and is 
copyrighted. Any reproduction in whole or in part is strictly 
prohibited. 

Channel Surfing, Corel, Fluid, FraxFlame II, 
Gradient Lab, Hyper Tiling, Ink Dropper, KPT, 
Pyramid Paint and Scatter are trademarks 
or registered trademarks of Corel Corporation or Corel 
Corporation Limited.

Adobe, Acrobat, and Reader are registered trademarks of 
Adobe Systems Incorporated in the United States and/or other 
countries.

Mac, Macintosh, QuickTime and the QuickTime logo are 
trademarks used under license.  The QuickTime logo is registered 
in the U.S. and other countries. 

Other product, font, and company names and logos may be 
trademarks or registered trademarks of their respective companies.